What Brand of Hoist Do I Have?
Finding the right replacement parts for your hoist can be tricky. We've put together the following information for use as a guide to help you identify what brand and model of hoist you have. For further assistance, please contact our Customer Service staff.
|
Northern Hoist
|
Barbee Hoist
|
|---|---|
| Grey but some other colors offered in the past | All are red |
| Square tubing for braces | 1./2" rod for braces |
| Cylinders are 3" or 3.5" OD |
|
| Reservoirs are 3.875" OD |
|
We have parts for Northern and Barbee hoists only.
 |
 |
 |
| RW0260 Tiltalift | RW0460 Tiltalift | RW0560 Rotolift |
What's My Hoist Part Number?
| REFERENCE | ACTUAL PART NUMBER(S) |
| RW0150 | RW0150 |
| RW0160 | RW0160-35 |
| RW0260 | RW0260-45, RW0260-55 |
| RW0360 | RW0360-45, RW0360-55 |
| RW0460 | RW0460-55, RW0460-65 |
| RW0560 | RW0560 |
Which Hoist Do I Have?
- RW0260, RW0360, and RW0460 have 3.5" OD cylinders.
- RW0150, RW0160, and RW0560 have 3" OD cylinders.
- RW0360 and RW0460 are electric hydraulic, and all others are air hydraulic.
(RW0150, RW0160, and RW0360 were previously offered and are no longer available.)
 |
 |
 |
| RW0260 Tiltalift | RW0460 Tiltalift | RW0560 Rotolift |
|
|
|
|
What Style Table Do I Have?
- RW0150 doesn't have a table.
- Tiltalifts are on RW0160, RW0260, RW0360, and RW0460. Tiltalifts have arches. See table below for table size available for each hoist.
- Rotolifts are on RW0560 only.
| Table | RW0160 | RW0260 | RW0360 | RW0460 | RW0560 |
| 35" Tiltalift | X |
|
|
|
|
| 45" Tiltalift |
|
X | X | X |
|
| 55" Tiltalift |
|
X | X | X |
|
| 65" Tiltalift |
|
|
|
X |
|
| Rotolift |
|
|
|
|
X |
What Size Table Do I Have?
Measure along bottom of table from outside to outside.
| OUTSIDE TABLE MEASUREMENT | COMMON NAME | PART NUMBER TABLE ONLY | PART NUMBER TABLE ASSEMBLY |
| 38" | 35" Tiltalift | RW0280-26 | RW0280-D |
| 47.5" | 45" Tiltalift | RW0281-26 | RW0281-D |
| 57.5" | 55" Tiltalift | RW0282-26 | RW0282-D |
| 68" | 65" Tiltalift | RW0460-26 | RW0460-D |
| 35.25" | Rotolift | RW0285-26 | RW0285-D |
What Brass Block Is In The Clamp Casting?
 |
 |
 |
| RW0280-34 The clamp casting with nut. |
RW0160-8 Northern has a round clamp casting nut. |
RW0280-38-3 Barbee has a square clamp casting nut. |
Which Valve Does My Hoist Have?
|
Kingston Valve RW0088-A |
Air hydraulic hoists from Northern and Barbee have a Kingston valve which is RW0088-A. Northern electric hydraulic hoists have Greeson or Bucher valves. Greeson valves are no longer available through Northern but can be updated to a Bucher valve using a Bucher Valve kit which is RW0460-BVK and includes the valve. Barbee electric hydraulic hoists have Greeson valves and different microswitches. Barbee needs to be contacted for replacing these valves. |
Which Pivot Plate Does My Hoist Have?
Northern pivot plates (RW0280-28) for 35”, 45” and 55” tables use a ½” bolt. The grease zerk is in the plate.
Northern pivot plates (RW0460-28) for 65” tables use a 5/8” bolt. The grease zerk is in the plate.
Barbee has a different style pivot plate than Northern. They use a ½” bolt on both their small and large hoists. The Barbee grease zerk is in the bolt and not in the plate. We do not offer Barbee pivot plates.
A Northern pivot plate can be used on a Barbee if the entire assembly is changed out. For an RW0260, this is RW0280-29 and RW0280-28. For an RW0460, this is RW0460-29 and RW0460-28.
 |
 |
| RW0280-28 | RW0460-28 |
Are The Brake And Arch From Northern or Barbee Interchangeable?
Northern brake and arch can be used to replace a Barbee, but you must replace both at the same time.
Are The Tables And Clamp Posts Interchangeable?
Northern and Barbee tables and clamp posts are interchangeable.